canuck travellers
New member
- Joined
- Aug 7, 2012
- Posts
- 2
Any one interested in this Hitch?
We are in Moncton, NB, if interested and if in the surrounding area you can look at it. It was used on our 2003 2500 HD Chevrolet Silverado Diesel, it may not fit all Chevy Trucks as the hooks on the front may be closer or farther apart. Look at the pictures with the measuring tape shown for measurements.
However for us it worked great hauling two bikes from NB to South Florida for many years, it's in good shape as one can see from the pictures.
Here's a general description if interested;
"I had used this on my 2003 Chevrolet Silverado 2500HD Diesel, it should fit several other vehicles with hooks in the front of the vehicle.
If interested please look at my 2017 Chevrolet Silverado 1500 LTZ.
In that truck the hooks were a bit too far apart to use it.
Again if interested measure your hooks to see if they are the right distance to fit this receiver.
We used this receiver to carry our bikes when we had a fifth wheel and later a pull behind trailer back and to South Florida, it worked great, frees up other storage areas, no problem seeing the road as you are looking over it. It eliminates the need to weld rear hitches on one's fifth wheel or pull behind trailers to carry bikes. Welding hitches on one's RV in the rear of it in most instances could cause warranty problems or so I was warned by my RV manufacturer so beware. Welding a Hitch on one's RV also lightens the pin weight on your RV Hitch which can cause swaying.
Using this front Hitch when one has hooks on the vehicle that fits it eliminates many issues."
We are in Moncton, NB, if interested and if in the surrounding area you can look at it. It was used on our 2003 2500 HD Chevrolet Silverado Diesel, it may not fit all Chevy Trucks as the hooks on the front may be closer or farther apart. Look at the pictures with the measuring tape shown for measurements.
However for us it worked great hauling two bikes from NB to South Florida for many years, it's in good shape as one can see from the pictures.
Here's a general description if interested;
"I had used this on my 2003 Chevrolet Silverado 2500HD Diesel, it should fit several other vehicles with hooks in the front of the vehicle.
If interested please look at my 2017 Chevrolet Silverado 1500 LTZ.
In that truck the hooks were a bit too far apart to use it.
Again if interested measure your hooks to see if they are the right distance to fit this receiver.
We used this receiver to carry our bikes when we had a fifth wheel and later a pull behind trailer back and to South Florida, it worked great, frees up other storage areas, no problem seeing the road as you are looking over it. It eliminates the need to weld rear hitches on one's fifth wheel or pull behind trailers to carry bikes. Welding hitches on one's RV in the rear of it in most instances could cause warranty problems or so I was warned by my RV manufacturer so beware. Welding a Hitch on one's RV also lightens the pin weight on your RV Hitch which can cause swaying.
Using this front Hitch when one has hooks on the vehicle that fits it eliminates many issues."
